Sheet Metal Mechanic III
EOE Statement
We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law.
Description
SALARY: $30.00 - $36.00 per hour
Benefits: All eligible full time employees will receive Paid Annual Leave (PAL) starting at 23 days per year and raising by one day per year following one full calendar year of employment (January through December). They will also be offered health benefits and will be automatically enrolled in employer paid short and long term disability and life insurance.
All full time and part time employees have access to participate in the Delphinus Engineering 401(k) which includes company match of 25% up to 10% deferred.
GENERAL
Summary: Sheet Metal Mechanics must understand how to perform tasks in these categories (including, but not limited to, the specific tasks identified below) and is able to complete them with minimal assistance. This also means that the mechanic has the necessary level of knowledge of the equipment, protective gear, and machinery required to complete these tasks.
LOCATION: San Diego, CA
Position Requirements
REQUIREMENTS:
Must understand the layout of the ship and compartment identification
Must demonstrate knowledge of blueprint reading, written requirements, and ship terminology.
Must function and operate hand tools and power tools with no assistance safely and efficiently
Must have proficient in Habitability layout and installation of metal joiner (MJ) bulkheads, MJ doors, berths, galleys, and office outfitting.
Must work under industrial repair conditions; work in confined spaces; climb vertical and inclined ladders; operate basic hand-held manual and power tools; and lift objects that weigh up to 50 pounds and seek assistance with weights over 50 lbs.
Must have possess an in-depth knowledge of the Sheetmetal trade and have the ability to understand and delegate ship work.
Must be able to supervise and mentor and direct lower class sheet metal mechanics and helpers
Must possesses in-depth knowledge
Must be able to comply with all applicable safety regulations
Must know various materials to include galvanized steel, aluminum, stainless steel, etc.
Must be able to supervise and direct a small to medium installation team (3-10 personnel) with minimal guidance.
Must ensuring that quality standards are adhered to by themselves as well as other employees,
Must be Physically and Medically qualified to wear required PPE (Personal Protective Equipment) for the job
Must be able to fabricate and install sheet metal items, vent, flashing, racks, lockers, bulkhead panels, sanitary space install etc.
Must be able to weld sheet metal components using GTAW and / or MIG weld processes
Minimum relevant
Experience: 5 to 8 yrs.
Must be able to read, write and comprehend simple instructions.
Must be able to apply common sense understanding to carry out instructions in written, oral or diagram form.
Must be able to calculate and understand units of measure, including fractions and decimals.
Must want to excel in the shipyard.
Must be able to pass Drug Screening, Work Ability Screening.
Must be able to obtain government access badge.
This job description does not include all activities, duties or responsibilities required for this position. The key duties, responsibilities and requirements identified in this description are subject to modification by the Company at any time
Full-Time/Part-Time
Full-Time
Position
Sheet Metal Mechanic III
Close Date
Exempt/Non-Exempt
Non-Exempt
Req Number
SKI-22-00007
Location
Chula Vista, CA
About the Organization
Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets.
As a successful graduate of the Small Business Administration's 8(a) program, we have evolved into a leading provider of expert services in our core competencies of Cyber Operations and Security, Marine Engineering and Design, Marine Services, and Business Management. Headquartered in Eddystone, Pennsylvania, we have primary offices in Norfolk, Virginia; San Diego, California; and Bremerton, Washington, with liaison facilities in Philadelphia, Pennsylvania, and Pearl Harbor, HI.
Delphinus' business model is based on the values established by our leadership and shared by all Delphinus employees:
Focusing on Our Customers and Promoting Partnership
Treating People with Respect and Dignity
Ensuring Integrity in Our Business Practices
Engaging Our Industry Partners
Honoring Commitments
Achieving Excellence
This position is currently accepting applications.Estimated Salary: $20 to $28 per hour based on qualifications.
We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law.
Description
SALARY: $30.00 - $36.00 per hour
Benefits: All eligible full time employees will receive Paid Annual Leave (PAL) starting at 23 days per year and raising by one day per year following one full calendar year of employment (January through December). They will also be offered health benefits and will be automatically enrolled in employer paid short and long term disability and life insurance.
All full time and part time employees have access to participate in the Delphinus Engineering 401(k) which includes company match of 25% up to 10% deferred.
GENERAL
Summary: Sheet Metal Mechanics must understand how to perform tasks in these categories (including, but not limited to, the specific tasks identified below) and is able to complete them with minimal assistance. This also means that the mechanic has the necessary level of knowledge of the equipment, protective gear, and machinery required to complete these tasks.
LOCATION: San Diego, CA
Position Requirements
REQUIREMENTS:
Must understand the layout of the ship and compartment identification
Must demonstrate knowledge of blueprint reading, written requirements, and ship terminology.
Must function and operate hand tools and power tools with no assistance safely and efficiently
Must have proficient in Habitability layout and installation of metal joiner (MJ) bulkheads, MJ doors, berths, galleys, and office outfitting.
Must work under industrial repair conditions; work in confined spaces; climb vertical and inclined ladders; operate basic hand-held manual and power tools; and lift objects that weigh up to 50 pounds and seek assistance with weights over 50 lbs.
Must have possess an in-depth knowledge of the Sheetmetal trade and have the ability to understand and delegate ship work.
Must be able to supervise and mentor and direct lower class sheet metal mechanics and helpers
Must possesses in-depth knowledge
Must be able to comply with all applicable safety regulations
Must know various materials to include galvanized steel, aluminum, stainless steel, etc.
Must be able to supervise and direct a small to medium installation team (3-10 personnel) with minimal guidance.
Must ensuring that quality standards are adhered to by themselves as well as other employees,
Must be Physically and Medically qualified to wear required PPE (Personal Protective Equipment) for the job
Must be able to fabricate and install sheet metal items, vent, flashing, racks, lockers, bulkhead panels, sanitary space install etc.
Must be able to weld sheet metal components using GTAW and / or MIG weld processes
Minimum relevant
Experience: 5 to 8 yrs.
Must be able to read, write and comprehend simple instructions.
Must be able to apply common sense understanding to carry out instructions in written, oral or diagram form.
Must be able to calculate and understand units of measure, including fractions and decimals.
Must want to excel in the shipyard.
Must be able to pass Drug Screening, Work Ability Screening.
Must be able to obtain government access badge.
This job description does not include all activities, duties or responsibilities required for this position. The key duties, responsibilities and requirements identified in this description are subject to modification by the Company at any time
Full-Time/Part-Time
Full-Time
Position
Sheet Metal Mechanic III
Close Date
Exempt/Non-Exempt
Non-Exempt
Req Number
SKI-22-00007
Location
Chula Vista, CA
About the Organization
Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets.
As a successful graduate of the Small Business Administration's 8(a) program, we have evolved into a leading provider of expert services in our core competencies of Cyber Operations and Security, Marine Engineering and Design, Marine Services, and Business Management. Headquartered in Eddystone, Pennsylvania, we have primary offices in Norfolk, Virginia; San Diego, California; and Bremerton, Washington, with liaison facilities in Philadelphia, Pennsylvania, and Pearl Harbor, HI.
Delphinus' business model is based on the values established by our leadership and shared by all Delphinus employees:
Focusing on Our Customers and Promoting Partnership
Treating People with Respect and Dignity
Ensuring Integrity in Our Business Practices
Engaging Our Industry Partners
Honoring Commitments
Achieving Excellence
This position is currently accepting applications.Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
